Glands for Hazardous areas

FLP EExd I / IIC captive cone gland
MAC - Multi Armour Cone

Features and Benefits
• Two part handling, freely rotating captive cone for earth continuity 
  and armour clamping.
• Factory fitted with a specially formulated elastomeric seal provides 
  built-in safety.
• No loose parts that can get lost.
• Manufactured from high quality brass, nickel plated and stainless steel.
• Complete with an orange thread cap / safety gauge for correct gland selection.

 
Technical Data
Type FLP
Gland Material Brass (Nickel Plated), Stainless Steel
Seal Material Thermoplastic Elastomer
Cable Type Steel Wire, Braid, Tape Armour
Armour Clamping Captive Cone and Cone Ring
Sealing Area Inner sheath
Optional Accessories Shroud, Adaptor/Reducer
 
Standards and Certifications

Hazardous Area Classification

  

SANS/SABS IEC 

Zone 1, 2, 21and 22 Exd I / IIC, Exe I / IIC and DIP

CENELEC / ATEX

Category 2, Category 3, EExde I / II 2 GD, EExd I M2

Compliance Code

Certification No.

CENELEC / ATEX

EN50014:1997E

DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044

EN50018:2000E

DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044

EN50019:2000E

DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044

EN50281-1-1:1999E

DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044

SANS / SABS / IEC

    

SANS 808

SABS MS/W 455U

SANS/SABS IEC 60079-0

2000

SABS MS/W 455U

SANS/SABS IEC 60079-1

2001

SABS MS/W 455U

SANS/SABS IEC 60079-7

2001

SABS MS/W 455U

SANS/SABS IEC 60529

1989

SABS MS/W 455U

SANS/SABS IEC 61241.1.1

1999

SABS MS/W 455U

CHINESE

GB3638. 1-2000 part 1

CNEx09 0428U

GB3638. 2-2000 part 2

CNEx09 0428U

GB3638. 3-2000 part 3

CNEx09 0428U

GB12476. 1-2000

CNEx09 0428U
Ingress Protection IP66/67/68
Operating Temperature -30°C to + 130°C

Special Conditions for Safe Use - X
Glands that incorporate a seal with an uncompressed height of less than 20mm shall not be used with EEX d IIC apparatus that has a volume in excess of 2000cc. If mounted in flame proof enclosures, make sure that at least threads are engaged and that the depth of engagement of enclosures smaller than 100 cm3 are at least 5mm and for enclosures larger than 100 cm3 at least 8mm.

 
 

All content copyright © CCG Cable Glands
Western Australia (Perth)
Unit 2, 8 Langar Way, Landsdale, West Australia 6065  :  info@ccgcableglands.com.au
Tel: +61 8 9303 9112  :  Fax: +61 8 9303 2986  : PO Box 285, Joondalup, Western Australia 6919, Australia
Queensland (Brisbane)
Unit 5, 90 Wecker Rd, Mansfield, Brisbane, Queensland 4122, Australia  :  ccgqld@powerup.com.au
Tel: +61 7 3349 9880  :  Fax: +61 7 3349 9847  :  PO Box 3067, Birkdale, Queensland 4159, Australia

Queensland (Townsville)
Unit 4, 58 Pilkington St, Garbutt, Queensland 4814, Australia  :  todd.ccg@bigpond.com
Tel: +61 7 4779 6133  :  Fax: +61 7 4779 4877  :  P O Box 448, East Garbutt, Queensland 4814
Victoria    Tel: 03 9312 6633 :  Fax: 03 9312 6433
New South Wales   Tel: 02 4961 4433  :  Fax: 02 4961 2498  | Tasmania   Tel: 03 6273 4455  :  Fax: 03 6273 0575