Glands for Hazardous areas

Ex Corrosion Guard EExde IIC
MAC - Multi Armour Cone

Features and Benefits
• For use in highly corrosive and wet locations.
• Cable gland manufactured from high quality brass and nickel plated.
• Factory fitted captive elastomeric seals for built-in safety.
• The screw-on Corrosion Guard is manufactured from non-corrosive 
  material to protect the steelwire armour and metal parts of the gland.
• Corrosion Guard screws onto the gland body and seals over the outer 
  sheath of the cable giving an IP 68 seal.
• Complete with a polypropylene gasket.

 
Technical Data
Type EX Corrosion Guard
Gland Material Brass (Nickel Plated)
Corrosion Guard Material Glass Reinforced Polyester Compound/PBT
Seal Material Thermoplastic Elastomer
Cable Type Steel Wire, Braid, Tape Armour
Armour Clamping Multi Armour Cone and Cone Ring
Sealing Area Inner & outer sheath & total enclosure of gland
Optional Accessories Locknut
 
Standards and Certifications

Hazardous Area Classification

 

SANS/SABS IEC, AS/NZS IEC, CNEx

Zone 1, 2, 21and 22 Exde IIC and DIP

CENELEC / ATEX

Category 2, Category 3, EExde IIC 2 GD

Compliance Code

Certification No.

CENELEC / ATEX

EN50014:1997E

DEMKO 01 ATEX 130325X

EN50018:2000E

DEMKO 01 ATEX 130325X

EN50019:2000E

DEMKO 01 ATEX 130325X

EN50281-1-1:1999E

DEMKO 01 ATEX 130325X

SANS / SABS / IEC

   

SANS/SABS 1213

SABS S/W 452UX

SANS/SABS IEC 60079-0

2000

SABS S/W 452UX

SANS/SABS IEC 60079-1

2001

SABS S/W 452UX

SANS/SABS IEC 60079-7

2001

SABS S/W 452UX

SANS/SABS IEC 60529

1989

SABS S/W 452UX

SANS/SABS IEC 61241.1.1

1999

SABS S/W 452UX

AUSTRALIAN / NEW ZEALAND / IEC

AS/NZS IEC 60079-0

2000

AUS Ex 03.3844X

AS/NZS IEC 60079-1

2001

AUS Ex 03.3844X

AS/NZS IEC 60079-7

2001

AUS Ex 03.3844X

AS/NZS IEC 60529

1989

AUS Ex 03.3844X

AS/NZS IEC 61241.1.1

1999

AUS Ex 03.3844X

CHINESE

GB3638. 1-2000 part 1

CNEx09 0427U

GB3638. 2-2000 part 2

CNEx09 0427U

GB3638. 3-2000 part 3

CNEx09 0427U

GB12476. 1-2000

CNEx09 0427U

Ingress Protection IP66/67/68
Operating Temperature -30°C TO +130°C

Special Conditions for Safe Use - X
Glands must be used as part of a certified assembly in surface installations only
Not for use on Exd enclosures that are larger than 2000cm3 volume in group IIC gases in zone 1 areas

 
Standards and Certifications
ABS 09-SG435709-PDA
 
 

All content copyright © CCG Cable Glands

Western Australia (Perth)
Unit 2, 8 Langar Way, Landsdale, West Australia 6065  :  info@ccgcableglands.com.au
Tel: +61 8 9303 9112  :  Fax: +61 8 9303 2986  : PO Box 285, Joondalup, Western Australia 6919, Australia
Queensland (Brisbane)
Unit 5, 90 Wecker Rd, Mansfield, Brisbane, Queensland 4122, Australia  :  ccgqld@powerup.com.au
Tel: +61 7 3349 9880  :  Fax: +61 7 3349 9847  :  PO Box 3067, Birkdale, Queensland 4159, Australia

Queensland (Townsville)
Unit 4, 58 Pilkington St, Garbutt, Queensland 4814, Australia  : 
todd.ccg@bigpond.com
Tel: +61 7
4779 6133  :  Fax: +61 7 4779 4877  :  P O Box 448, East Garbutt, Queensland 4814

Victoria    Tel: 03 9312 6633 :  Fax: 03 9312 6433
New South Wales   Tel: 02 4961 4433  :  Fax: 02 4961 2498  | Tasmania   Tel: 03 6273 4455  :  Fax: 03 6273 0575