Glands for Hazardous areas

D1EX EExde IIC captive cone gland  
MAC - Multi Armour Cone

Features and Benefits
• For use indoors and hazardous areas.
• Two piece handling, no loose parts.
• Freely rotating captive cone, providing an armour clamp and earth bond 
  without twisting the armour wires.
• Factory fitted captive elastomeric seals for built-in safety.
• Seals on the inner sheath of the cable.
• Manufactured from high quality brass, nickel plated and stainless steel.
• Complete with polypropylene sealing gasket.

 
Technical Data
Type D1EX
Gland Material Brass (Nickel Plated), Stainless Steel
Seal Material Thermoplastic Elastomer (Silicone on request)
Cable Type Steel Wire, Braid, Tape Armour
Armour Clamping Multi Armour Cone and Cone Ring
Sealing Area Inner sheath
Optional Accessories Locknut, Shroud, Earth Tag, Adaptor / Reducer
 
Standards and Certifications

Hazardous Area Classification

  

SANS/SABS IEC, AS/NZS IEC, CNEx

Zone 1, 2, 21and 22 Exde IIC and DIP

CENELEC / ATEX

Category 2, Category 3, EExde II 2 GD

Compliance Code

Certification No.

CENELEC / ATEX

EN50014:1997E

DEMKO 01 ATEX 130325X

EN50018:2000E

DEMKO 01 ATEX 130325X

EN50019:2000E

DEMKO 01 ATEX 130325X

EN50281-1-1:1999E

DEMKO 01 ATEX 130325X

SANS / SABS / IEC

    

SANS/SABS 1213

SABS S/W 449UX

SANS/SABS IEC 60079-0

2000

SABS S/W 449UX

SANS/SABS IEC 60079-1

2001

SABS S/W 449UX

SANS/SABS IEC 60079-7

2001

SABS S/W 449UX

SANS/SABS IEC 60529

1989

SABS S/W 449UX

SANS/SABS IEC 61241.1.1

1999

SABS S/W 449UX

AUSTRALIAN / NEW ZEALAND / IEC

AS/NZS IEC 60079-0

2000

AUS Ex 03.3844X

AS/NZS IEC 60079-1

2002

AUS Ex 03.3844X

AS/NZS IEC 60079-7

2001

AUS Ex 03.3844X

AS               1939

1990

AUS Ex 03.3844X

AS/NZS IEC 61241.1.1

1999

AUS Ex 03.3844X

CHINESE

GB3638. 1-2000 part 1

CNEx09 0427U

GB3638. 2-2000 part 2

CNEx09 0427U

GB3638. 3-2000 part 3

CNEx09 0427U

GB12476. 1-2000

CNEx09 0427U
Ingress Protection IP66/67/68
Operating Temperature -30°C TO +130°C

Special Conditions for Safe Use - X
Glands must be used as part of a certified assembly in surface installations only
Not for use on Exd enclosures that are larger than 2000cm3 volume in group IIC gases in zone 1 areas

 
 

All content copyright © CCG Cable Glands
Western Australia (Perth)
Unit 2, 8 Langar Way, Landsdale, West Australia 6065  :  info@ccgcableglands.com.au
Tel: +61 8 9303 9112  :  Fax: +61 8 9303 2986  : PO Box 285, Joondalup, Western Australia 6919, Australia
Queensland (Brisbane)
Unit 5, 90 Wecker Rd, Mansfield, Brisbane, Queensland 4122, Australia  :  ccgqld@powerup.com.au
Tel: +61 7 3349 9880  :  Fax: +61 7 3349 9847  :  PO Box 3067, Birkdale, Queensland 4159, Australia

Queensland (Townsville)
Unit 4, 58 Pilkington St, Garbutt, Queensland 4814, Australia  :  todd.ccg@bigpond.com
Tel: +61 7 4779 6133  :  Fax: +61 7 4779 4877  :  P O Box 448, East Garbutt, Queensland 4814
Victoria    Tel: 03 9312 6633 :  Fax: 03 9312 6433
New South Wales   Tel: 02 4961 4433  :  Fax: 02 4961 2498  | Tasmania   Tel: 03 6273 4455  :  Fax: 03 6273 0575