Glands for Hazardous areas

Corrosion Guard Lead Seal EExde IIC Gland  

Features and Benefits
• For use in highly corrosive and wet locations.
• Cable gland manufactured from high quality brass and nickel plated.
• Lead Seals are supplied to match the exact dimensions of cable given 
  by the customer.
• The screw-on Corrosion Guard is manufactured from non-corrosive 
  material to protect the steelwire armour and metal parts of the gland.
• Corrosion Guard screws onto the gland body and seals over the outer
   sheath of the cable giving an IP 68 and deluge proof seal.
• Complete with a brass locknut and polypropylene gasket.

 
Technical Data
Type EX Corrosion Guard Lead Seal Gland (E2W)
Gland Material Brass (Nickel Plated)
Corrossion Guard Material Glass Reinforced Polyester Compound/PBT
Seal Material Thermoplastic Elastomer and Lead
Cable Type Steel Wire Armour, Lead Sheath
Armour Clamping Captive Cone and Cone Ring
Sealing Area Inner lead sheath and outer sheath
Optional Accessories Locknut
 
Standards and Certifications

Hazardous Area Classification

  

SANS/SABS IEC 

Zone 1, 2, 21and 22 Exe IIC and DIP

CENELEC / ATEX

Category 2, Category 3, EExde IIC 2 GD

Compliance Code

Certification No.

CENELEC / ATEX

EN50014      1997E

DEMKO 01 ATEX 130325X

EN50018      2000E

DEMKO 01 ATEX 130325X

EN50019      2000E

DEMKO 01 ATEX 130325X

EN50281      1999E

DEMKO 01 ATEX 130325X

SANS / SABS / IEC

    

SANS/SABS 1213

SABS S/W 448U

SANS/SABS IEC 60079-0

2000

SABS S/W 448U

SANS/SABS IEC 60079-7

2001

SABS S/W 448U

SANS/SABS IEC 60529

1989

SABS S/W 448U

SANS/SABS IEC 61241.1.1

1999

SABS S/W 448U
Ingress Protection IP66/67/68
Operating Temperature -30°C TO +130°C

Special Conditions for Safe Use - X
Glands must be used as part of a certified assembly in surface installations only
Not for use on Exd enclosures that are larger than 2000cm3 volume in group IIC gases in zone 1 areas

 
 

All content copyright © CCG Cable Glands
Western Australia (Perth)
Unit 2, 8 Langar Way, Landsdale, West Australia 6065  :  info@ccgcableglands.com.au
Tel: +61 8 9303 9112  :  Fax: +61 8 9303 2986  : PO Box 285, Joondalup, Western Australia 6919, Australia
Queensland (Brisbane)
Unit 5, 90 Wecker Rd, Mansfield, Brisbane, Queensland 4122, Australia  :  ccgqld@powerup.com.au
Tel: +61 7 3349 9880  :  Fax: +61 7 3349 9847  :  PO Box 3067, Birkdale, Queensland 4159, Australia

Queensland (Townsville)
Unit 4, 58 Pilkington St, Garbutt, Queensland 4814, Australia  :  todd.ccg@bigpond.com
Tel: +61 7 4779 6133  :  Fax: +61 7 4779 4877  :  P O Box 448, East Garbutt, Queensland 4814
Victoria    Tel: 03 9312 6633 :  Fax: 03 9312 6433
New South Wales   Tel: 02 4961 4433  :  Fax: 02 4961 2498  | Tasmania   Tel: 03 6273 4455  :  Fax: 03 6273 0575