Glands for Hazardous areas

Armortex EExd I / IIC Gland
MAC - Multi Armour Cone

Features and Benefits
• Nickel plated brass / stainless steel gland for steel wire, tape, braided, aluminium, armoured cable
• No need to change seals or reverse cones or cone rings to accommodate 
  different types of armoured cable.
• Captive cone and cone ring ensures no loose parts during assembly.
• Extra long captive explosion proof seal ensures built in safety.
• Armour clamp components can be inspected after installation.
• Gland can be used on Exd enclosures greater than 2 litres volume.

 
Technical Data
Type ARMORTEX
Gland Material Brass (Nickel Plated), Stainless Steel
Seal Material Thermoplastic Elastomer
Cable Type Steel Wire, Braid, Tape Armour
Armour Clamping Multi Armour Cone and Cone Ring
Sealing Area Inner and outer sheath
Optional Accessories and Tools Shroud, Earth Tag, Adaptor / Reducer
 
Standards and Certifications

Hazardous Area Classification

  

SANS/SABS IEC 

Zone 1, 2, 21and 22 Exd I / IIC, Exe I / IIC and DIP

CENELEC / ATEX

Category 2, Category 3, EExde I / II 2 GD, EExd I M2

Compliance Code

Certification No.

CENELEC / ATEX

EN50014:1997E

DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044

EN50018:2000E

DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044

EN50019:2000E

DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044

EN50281-1-1:1999E

DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044

SANS / SABS / IEC

    

SANS 808

SABS MS/W446U

SANS/SABS IEC 60079-0

2000

SABS MS/W446U

SANS/SABS IEC 60079-1

2001

SABS MS/W446U

SANS/SABS IEC 60079-7

2001

SABS MS/W446U

SANS/SABS IEC 60529

1989

SABS MS/W446U

SANS/SABS IEC 61241.1.1

1999

SABS MS/W446U

CHINESE

GB3638. 1-2000 part 1

CNEx09 0428U

GB3638. 2-2000 part 2

CNEx09 0428U

GB3638. 3-2000 part 3

CNEx09 0428U

GB12476. 1-2000

CNEx09 0428U
Ingress Protection IP66/67/68
Operating Temperature -30°C to + 130°C

Special Conditions for Safe Use - X
Glands that incorporate a seal with an uncompressed height of less than 20mm shall not be used with EEX d IIC apparatus that has a volume in excess of 2000cc. If mounted in flame proof enclosures, make sure that at least threads are engaged and that the depth of engagement of enclosures smaller than 100 cm3 are at least 5mm and for enclosures larger than 100 cm3 at least 8mm.

 
 

All content copyright © CCG Cable Glands
Western Australia (Perth)
Unit 2, 8 Langar Way, Landsdale, West Australia 6065  :  info@ccgcableglands.com.au
Tel: +61 8 9303 9112  :  Fax: +61 8 9303 2986  : PO Box 285, Joondalup, Western Australia 6919, Australia
Queensland (Brisbane)
Unit 5, 90 Wecker Rd, Mansfield, Brisbane, Queensland 4122, Australia  :  ccgqld@powerup.com.au
Tel: +61 7 3349 9880  :  Fax: +61 7 3349 9847  :  PO Box 3067, Birkdale, Queensland 4159, Australia

Queensland (Townsville)
Unit 4, 58 Pilkington St, Garbutt, Queensland 4814, Australia  :  todd.ccg@bigpond.com
Tel: +61 7 4779 6133  :  Fax: +61 7 4779 4877  :  P O Box 448, East Garbutt, Queensland 4814
Victoria    Tel: 03 9312 6633 :  Fax: 03 9312 6433
New South Wales   Tel: 02 4961 4433  :  Fax: 02 4961 2498  | Tasmania   Tel: 03 6273 4455  :  Fax: 03 6273 0575