Boxes for use in hazardous areas
CCG 4 Way / Y Box EExe, Exn, DIP, IP68
Industrial and hazardous areas junction box

CCG 4 Way Box IP68
Features and Benefits
• For use in surface hazardous areas and general industrial electrical installations.
• Manufactured from impact, corrosion and UV resistant glass reinforced polyester compound.
• High temperature resistance and anti-static properties (black boxes only).
• Red Fire Rated box for emergency circuits (Rated 750ΊC for 30 min.)
• Screw-on lid allows ease of installation locked with a special key prevents 
  unauthorised tampering.
• No exposed metal parts.
• One box gives 1, 2, 3 and 4 way versatility (reduced stock holding).
• 4 blanking plugs provided.
• No drilling or tapping of entries required.

CCG Box Blanking Plugs

CCG Y Box IP68
Features and Benefits
• Internal earth continuity ring and earth studs provided.
• DIN rail mounting studs are provided for use with CCG terminal blocks (see leaflet No. T 010203).
• Raised domed lid facilitates connections to be made outside of the box.
• If boxes are used in hazardous areas only approved Exe glands and Exe non-sparking terminals
  must be fitted.
• Dust and water tight to IP68 when fitted with CCG sealed glands.
• Can be buried for extended periods.
• Boxes with see through polycarbonate ’’adapt-a lids‘‘ available on request.
• 4 way H-boxes with parallel entries available on request.

CCG Pole Mounting Bracket for 'Y' Box
 
Standards and Certifications
Hazardous Area Classification

 (100201-B only)

IEC, SABS, AUS Ex, CNEx< Zone 1,2 21 and 22 Ex e IIC and DIP
CENELEC / ATEX Catergory 2, Catergory 3, EEx e II 2 GD
ABS Marine APPROVAL

 09-SG435709B-PDA
Australian
AS2380.1 1989 ANZEx 08.2001
AS2380.6 1988 ANZEx 08.2001
AS2380.9 1991 ANZEx 08.2001
AS2236 1994 ANZEx 08.2001

CENELEC / ATEX
EN50014 1997E DEMKO 01 ATEX 130324(Apparatus) 130515U(Unfinished)
EN50019 2000E DEMKO 01 ATEX 130324(Apparatus) 130515U(Unfinished)
EN50281-1-1-1 1999E DEMKO 01 ATEX 130324(Apparatus) 130515U(Unfinished)

Chinese
GB3836.1.2000 CNEx09.0430x
GB3836.3.2000 CNEx09.04430x
GB12476.1.2000 CNEx09.0430x

SABS/SANS/IEC
SANS/SABS IEC 60529
SANS/SABS IEC 60079-7
SANS/SABS IEC 60079-0
SANS/SABS IEC 60079-15
SANS/SABS IEC 61241-0
SANS/SABS IEC 61241-1

SAEx S/07/086x
SAEx S/07/086x S777/M132
SAEx S/07/086x S777/M132
SAEx S/07/086x
SAEx S/07/086x
SAEx S/07/086x
Ingress Protection IP 66/67/68 (2m Cont.)
Ambient Temp T70'C (-55'C < Tamb < 55'C)
Operating Temp 65'C to +80'C
 
 

All content copyright © CCG Cable Glands
Western Australia (Perth)
Unit 2, 8 Langar Way, Landsdale, West Australia 6065  :  info@ccgcableglands.com.au
Tel: +61 8 9303 9112  :  Fax: +61 8 9303 2986  : PO Box 285, Joondalup, Western Australia 6919, Australia
Queensland (Brisbane)
Unit 5, 90 Wecker Rd, Mansfield, Brisbane, Queensland 4122, Australia  :  ccgqld@powerup.com.au
Tel: +61 7 3349 9880  :  Fax: +61 7 3349 9847  :  PO Box 3067, Birkdale, Queensland 4159, Australia

Queensland (Townsville)
Unit 4, 58 Pilkington St, Garbutt, Queensland 4814, Australia  :  todd.ccg@bigpond.com
Tel: +61 7 4779 6133  :  Fax: +61 7 4779 4877  :  P O Box 448, East Garbutt, Queensland 4814
Victoria    Tel: 03 9312 6633 :  Fax: 03 9312 6433
New South Wales   Tel: 02 4961 4433  :  Fax: 02 4961 2498  | Tasmania   Tel: 03 6273 4455  :  Fax: 03 6273 0575